Where you place your drapery rod or track decides how your custom drapes will look and what size they need to be. As a rule of thumb, mount the rod about 6 inches above the window and let it extend about 8 inches past the window on each side. If you have the wall space, going higher and wider makes the room feel taller and more luxurious. Then adjust for your wall space and ceiling height.
Custom drapes are sized to the rod, not just the window. The width of your rod sets how full the panels look when closed, and the rod height sets the finished length. So even though you start with window measurements, your hardware placement determines the final dimensions of your drapes.
If you enter your window dimensions into the Regal Drapes design tool, it uses these defaults:
This gives the open drapes room to stack back off the glass, so your view stays framed instead of covered, and the higher rod draws the eye upward and makes the whole room look taller.
One of the simplest design tricks is to hang your drapes higher and wider than the window itself. Mounting the rod well above the frame, and letting it extend past the sides, makes the window look larger and the room feel taller and more luxurious.
If a neighboring wall, corner, or window limits the width, a smaller extension still works. The design tool will resize the panels to fit.
Not every window fits the defaults. If a corner, a neighboring window, or a low ceiling gets in the way, enter your own rod width and height in the design tool, and it will recalculate the panel size for any drapery style.
Our designers suggest two good ways to choose the height:
Trust your eye. The best placement is the one that looks balanced in your room. If you are not sure, a Regal Drapes designer can review your space.
Once you know where the rod goes, choose the hardware from the Regal Drapes Hardware Catalog:
For most windows, about 8 inches wider than the window on each side. Some designers use as little as 3 to 6 inches. If wall space is limited, use a shorter rod with end caps and the design tool will adjust the drapes to fit.
About 6 inches above the window by default. For a taller look, go 12 inches or more above the frame, or up to the ceiling. Another good guide is one-half to two-thirds of the distance between the window trim and the ceiling, or 2 to 3 inches below the ceiling or crown molding.
Yes. A higher rod draws the eye upward, which makes the window and the ceiling look taller. Extending the rod past the window makes the window look wider as well.
Stackback is the space the drapes take up when they are open. Mounting the rod wider than the window lets the panels rest on the wall instead of covering the glass.
Yes. Enter your own rod width and height and the tool will recalculate the best panel size for the style you choose.
Yes. Our design team can review your space and recommend placement and hardware, and every order is backed by our 100% satisfaction guarantee.
Ready to see how your drapes will look? Start designing your drapes with the Regal Drapes design tool, or talk to a designer for help with your space.